Channel Islands Twin Pin 6'3 x 20 ⅜ x 2 ¾ Surfboard
Not Eligible for Free Shipping.
Availability: Only 1 left
Only 1 left
Use coupon code 15OFFSURF to save 15% on any full priced fins, board bags, traction, and leashes with any new surfboard purchase.
This beauty of a board is the result of an epic collaboration with one of the world’s most stylish surfers @MikeyFebruary and Channel Islands' lead Shaper and Designer Britt Merrick. They worked on this versatile twin-finned pintail for over two years, with the goal of creating a board that had all the fun twin feels but enough hold and projection to free you from ever wishing for a third fin or trailer. Designed as an all-rounder, it helps you rip in anything from the mellow mushy stuff to nearing double overhead rifling walls. Along the way, Britt also developed a specific fin just for the Twin Pin Channel Islands simply dubbed the Britt Merrick Twin—a well-tested and balanced blend between a more upright style fin like the MTF and classic keel outline like the AMK.
From the nose and toward the back, the bottom is flat, then to a slight roll, and vee in the back half, which creates a buttery board that is both responsive and solid. The rails are low, so most people ride the Twin Pin at least 1/8” thicker than their shortboard. It works best with the special twin fin template Britt designed just for this board that is between a keel and upright and provides the right balance of drive, hold, and maneuverability.
The Twin Pin can be ridden with various dimensional approaches according to what you want to do, ride, and feel. Mikey February surfs a 6’0” shortboard and likes his Twin Pins at 5’9” and 5’11” to suit any conditions around the world. Tanner Gudauskas likes his the same length as his normal shortboard for Trestles, and Britt likes to ride his Twin Pins at Rincon a couple of inches longer than his regular shortboards.
- Type: All-rounder / Twin board
- Dimensions: 6'3" x 20 ⅜" x 2 ¾"
- Construction: Polyurethane/Polyester Resin
- Volume: 38.1L
- Tail: Rounded
- Fin Configuration: Twin
- Fin Plug: Futures Fins compatible fin boxes
*Fins NOT included
Polyurethane is the traditional way of hand making surfboards. This technique was introduced in the '50s and came after wooden surfboards. It starts with a polyurethane foam blank which is then glassed over with a fiberglass cloth. Polyester Resin is then applied by working on several layers before the board is finally sanded down to its final state. The result is a nice clean, smooth, hand shaped surfboard. What's also nice about this construction is that the PU foam is a closed cell so that it won't easily soak in water if you happen to encounter a ding. Plus, the technique has been perfected over the years and surfers know it so it feels familiar under their feet.
Write Your Own Review
Call us at 888-546-6176 or 503-738-7888 to learn more about our Surfboard shapes, our opinions on how they ride, or if you need any additional shipping information you can use our contact page.
US Shipping Rates for New & Used Surfboards
|Location||5'9 and under||5'10 to 6'10||6'11 to 8'0||~8'0 and up||Bodyboard||Skimboard|
|Lower 48 States||$125||$150||$175||Contact Us||$25||$25|
|Hawaii & Alaska||Contact Us||Contact Us||Contact Us||Contact Us||$75||$100|
Read more about our Shipping Policy.